customer drawing tyco electronics 300 constitution dr menlo park, ca 94025, u.s.a. title: soldersleeve shield terminator unless otherwise specified dimensions are in millimeters. [inches dimensions are shown in brackets] raychem devices document no.: d-104-00 tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron tyco electronics rese rves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. rev: a date: 22-aug-07 drawn by: p.tally cage code: 06090 replaces: d981826 eco number: 07-019646 scale: nts size: a sheet: 1 of 1 if this document is printed it becomes unc ontrolled. check for the latest revision ? 2007 tyco electronics corporation. all rights reserved materials 1. insulation sleeve: heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. solder preform with flux: solder: type sn63 per ansi-j-std-006. flux: type rol1 per ansi-j-std-004. 3. meltable rings: thermally stabilized thermoplastic. color: natural. application 1. this part is designed to provide an environmen t protected shield termination on cables, rated for 125 c minimum, meeting the dimensional criteria listed, having tin or silver plated copper shields. 2. install using tyco electronics approved convection or infrare d tools in accordance with tyco electronics assembly procedure rcps-100-70. 3. assemblies will meet requirements of tyco electronics specification rt-1404 and nationa l aerospace standard nas-1747. 4. temperature range: -55 c to +150 c. for best results, prepare the cable as shown: product dimensions cable dimensions product name l max ?a min ?b min ?d max ?e min j 0.5 (j 0.02) m 0.5 (m 0.02) d-104-00 29.75 (1.170) 10.80 (0.425) 11.65 (0.460) 11.43 (0.450) 5.70 (0.225) 8 (0.315) 9 (0.355)
|
